Reference
Cisco IOS Release 12.2 Wide Area Network Command Reference:
http://www.cisco.com/univercd/cc/td/doc/product/software/wan_r/wrdfrely.htm
Cisco Frame Relay Configurations
- By Jonathan Chin.
- Sample Chapter is provided courtesy of Cisco Press.
- Date: Apr 30, 2004.
Chapter Information
Contents
- Configuring Frame Relay
- Enabling Frame Relay Encapsulation
- Configuring the LMI Type on a Frame Relay Interface
- Configuring Static and Dynamic DLCI to Network Layer Address Mapping
- Configuring Frame Relay Subinterfaces
- Using Frame Relay Point-to-Point Subinterfaces
- Configuring a Cisco Router as a Frame Relay Switch
- Local Significance Approach to DLCI Assignment
- Verifying Frame Relay Connections with IOS show Commands
- Troubleshooting Frame Relay Connections with Cisco IOS debug Commands
- Summary
- Review Questions
- Reference
Chapter Description
Jonathan Chin dicussess basic Frame Relay operations on Cisco routers in a router-based Frame Relay network. He also explains how to configure a basic frame relay network involving Cisco equipment and how to perform basic monitoring and troubleshooting using relevant Cisco IOS show and debug commands.
