Home > Articles > Cisco Network Technology > General Networking > Capturing Network Traffic for the Catalyst 6000 IDS Module

Capturing Network Traffic for the Catalyst 6000 IDS Module

  • Article is provided courtesy of Cisco Press.
  • Date: Feb 15, 2002.

Contents

  1. SPAN Port Feature
  2. VACL Feature
  3. Summary

Article Description

Cisco IDS incorporates intrusion-detection capability directly into your infrastructure through the Catalyst 6000 Intrusion Detection System (IDS) Module. Using multiple IDS Modules in a single catalyst 6000 family switch enables you to process multiple 100MB traffic streams, as discussed in this article by Earl Carter.

Like this article? We recommend

Cisco Secure Intrusion Detection System

Cisco Secure Intrusion Detection System

$50.00

VACL Feature

Virtual LAN (VLAN) access control lists (ACLs), or VACLs, control the redirection of all packets on a Catalyst 6000 family switch via a Policy Feature Card (PFC). VACLs, which are for security packet filtering, enable you to redirect traffic to specific physical switch ports. Unlike IOS ACLs, VACLs are not direction-specific. They automatically capture traffic traveling both inbound and outbound.

Capturing traffic with SPAN ports is accomplished with a single switch command. To utilize VACLs, however, you must perform the following four steps:

  1. Create a VACL to capture interesting traffic.
  2. Commit the VACL to memory.
  3. Map the VACL to specific VLAN(s).
  4. Assign the IDSM monitoring port as the VACL capture port.

Unlike SPAN, VACLs give you a much higher degree of control over the type of traffic that you want to capture. You can capture traffic based on the source IP address or the destination IP address, as well as specifying a specific IP protocol number. Depending on the IP protocol chosen, you may also be able to specify other parameters as well. With TCP, for instance, you can specify both the source and destination ports, and limit the capture to only packets from established TCP connections. Furthermore, your Multilayer Switch Feature Card (MSFC) can utilize flows to effectively ensure that packets sent between different VLANs will cross the switch's backplane only once, eliminating duplicate packets being captured.

A flow is essentially a traffic stream between two IP addresses, a source port and destination port, or a source IP address/port combination and a destination IP address/port combination.

The first step in utilizing VACLs to capture traffic for your IDSM is to actually create the VACL. To define a VACL, you use the set security acl ip switch command. The syntax for this command when capturing TCP traffic is as follows:

set security acl ip acl_name permit [tcp | 6] src_ip_address 
     [operator port [port]] dest_ip_address [operator port [port]] 
     [established] [capture]

Some other options for the permit keyword are the following:

  • [ ip | 0 ]—Allows any IP traffic
  • [ udp | 17 ]—Allows any UDP traffic
  • [ icmp | 1 ]—Allows any ICMP traffic

The system automatically appends an implicit deny any any statement to the end of your VACL (similar to regular ACLs). Therefore, any traffic that is not explicitly permitted by your VACL cannot pass through your switch. Therefore, you need to create a permit statement at the end of your VACL that allows all unspecified traffic to pass through the switch. Otherwise, all traffic not specifically captured for analysis will be prevented from traversing the switch. You can do this by using the following command:

set security acl acl_name permit IP any any

Suppose you want to create a VACL that captures traffic matching the following characteristics:

  • Traffic originating from the Class C network 192.21.81.0
  • Traffic coming from ports 1—32000
  • Traffic whose destination address is on the Class C network 10.2.1.0
  • Traffic going to ports 1—1024
  • IP Protocol of the traffic is TCP

To create a VACL named TCPACL to capture this traffic, you would use the following set security acl ip switch command.

Cat6K> (enable) set security acl ip TCPACL permit tcp 
     192.21.81.0 0.0.0.255 range 1 32000 10.2.1.0 0.0.0.255 lt 1024
TCPACL editbuffer modified. Use 'Commit' command to apply changes
Cat6K> (enable) set security acl ip TCPACL permit ip any any
TCPACL editbuffer modified. Use 'Commit' command to apply changes
Cat6K> (enable)

After creating your VACL to capture interesting traffic, you need to commit this VACL to your hardware. You use the commit security acl switch command to accomplish this, and it has the following syntax:

commit security acl acl_name | all

To commit our sample VACL named TCPACL, you would use the following command:

Cat6K> (enable) commit security acl TCPACL
Hardware programming in progress...
ACL TCPACL is committed to hardware.
Cat6K> (enable)

Next, you need to map your VACL to specific VLANs on your switch by using the set security acl map switch command. This will enable the VACL to capture traffic from the VLANs that you map to it. The syntax for this command is as follows:

set security acl map acl_name vlan

Suppose that you want to map the sample VACL (TCPACL) to VLANs 100 and 120 on your switch. You can use the following switch commands:

Cat6K> (enable) set security acl map TCPACL 100
ACL TCPACL mapped to vlan 100
Cat6K> (enable) set security acl map TCPACL 120
ACL TCPACL mapped to vlan 120

You have defined the traffic that you are interested in, created an appropriate VACL, committed it to the hardware, and mapped it to specific VLANs on your switch. Now you need to configure the switch to send the captured traffic to the monitoring port on your IDSM so that it can examine the traffic for signs of intrusive activity. You need to use the set security acl capture-ports switch command to configure where to send the captured traffic. The syntax for this command is the following:

set security acl capture-ports {mod/ports}

In this example, your IDSM line card is located in the fifth slot. Therefore, your command to define the correct capture port becomes the following:

Cat6> (enable) set security acl capture-ports 5/1
Successfully set 5/1 to capture ACL traffic.
Cat6K> (enable)

VACLs overcome the session limitation imposed on SPAN ports because they capture traffic that matches a specified flow. This traffic can be from multiple VLANS and defined with a high degree of granularity with respect to specifying the interesting traffic that you want to capture. VACLS, however, do have a limitation. You are allowed to have only one VACL per protocol. This means that you can have only one VACL defined for capturing IP traffic. This one VACL, however, can be applied to multiple VLANS.

Cisco Press Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from Cisco Press and its family of brands. I can unsubscribe at any time.

Overview

Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about Cisco Press products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information

To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites; develop new products and services; conduct educational research; and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@ciscopress.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information

Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security

Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children

This site is not directed to children under the age of 13.

Marketing

Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information

If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out

Users can always make an informed choice as to whether they should proceed with certain services offered by Cisco Press. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.ciscopress.com/u.aspx.

Sale of Personal Information

Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents

California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure

Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links

This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact

Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice

We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020