Home > Articles > Cisco Network Technology > General Networking > Introduction to the Cisco Gateway Load Balance Protocol (GLBP)

Introduction to the Cisco Gateway Load Balance Protocol (GLBP)

  • Article is provided courtesy of Cisco Press.
  • Date: Oct 9, 2013.

Article Description

In this article, networking consultant Sean Wilkins introduces Gateway Load Balancing Protocol (GLBP) and how it operates, along with the main concepts that should be known before attempting to configure it.

Like this article? We recommend

CCNA Routing and Switching 200-120 Network Simulator

CCNA Routing and Switching 200-120 Network Simulator

$149.99

Often one of the least redundant parts of a network is the first hop between a host and the rest of the network. This is because they are typically configured with a default gateway IP address that links to a single device. Should this device fail, then all of the users on a specific segment who are using it as their default gateway will be unable to reach any other subnet including the Internet.

There are a number of different solutions to this problem, and most of these are all grouped together and referred to as First Hop Redundancy Protocols (FHRP). This article takes a look at the Gateway Load Balancing Protocol (GLBP), which is a Cisco proprietary FHRP that provides not only first-hop redundancy like HSRP and VRRP but also more integrated load-balancing capabilities.

This article specifically looks at GLBP, how it operates, along with the main concepts that should be known before attempting to configure it; another GLBP configuration article follows with the details of how to configure GLBP.

How Does GLBP Work?

The purpose of GLBP development was to bridge a gap that existed with the Hot Standby Router Protocol (HSRP)—that is, easy implementation of load balancing. With HSRP (and VRRP, the standard version of HSRP), the problem that exists is that only a single device within a group is ever forwarding traffic at any given time. When only a single device is actually forwarding data, a large amount of idle bandwidth is left sitting off the interfaces of the standby devices. There is a way to get around this by configuring multiple HSRP groups on the devices, but this also requires that half the hosts be configured with one gateway and the other half with another that increases the amount of administration and is still a crude solution to the problem.

GLBP works a bit differently from these other protocols. To understand this, there are two terms for GLBP device roles that need to be defined: Active Virtual Gateway (AVG) and Active Virtual Forwarder (AVF). The AVG is responsible for managing the traffic to all of the configured GLBP Active Virtual Forwarder (AVF) devices. That is done by controlling the ARP process. When GLBP comes up, the AVG is elected, and one of its first duties is to take responsibility for the virtual IP address and assign each of the configured GLBP devices with a virtual MAC address (including itself). When an ARP message is seen by the AVG, it responds and gives out these virtual MAC addresses in a round-robin format; this way, each of the AVFs is assigned an even amount of traffic from the devices requesting access. Up to four different virtual MAC addresses and thus AVFs can actively exist.

GLBP Redundancy

How redundancy works with GLBP can be a little confusing, especially if the engineer has had experience with HSRP and/or VRRP. With GLBP, there are actually two different types of redundancy: AVG redundancy and AVF redundancy. AVG redundancy works almost exactly the same as HSRP or VRRP redundancy; a single AVG is elected when GLBP comes up and keeps that role until it goes down or until another router takes the role from it. Like HSRP and VRRP, GLBP uses a priority to elect the AVG; in the case of a tie (the default is 100), the highest IP address is used. GLBP (AVG) preemption is disabled by default; what this means is that the current AVG must fail for another device to take over the role even if it has a higher priority.

AVF redundancy is a little different; if the device that is responsible for a specific virtual MAC address fails, one of the other current AVFs takes over the forwarding duties by taking over the specific virtual MAC address. This change is communicated to the current AVG, and over a series of timeouts, the traffic is transferred from that specific virtual MAC address to other, currently up, AVFs. Preemption for AVFs is enabled by default. This enables the other devices within GLBP to keep track of when an AVF fails and take over the duties proactively. 

GLBP Weighting and Interface Tracking

GLBP uses a concept of weighting to determine the load capacity of each of the AVFs. By default, each of the AVFs is configured with a weighting of 100 (values range from 1 to 254). By default, the load balancing behavior of GLBP is to use round robin, which will always result in a distribution of hosts to AVFs. If this load balancing behavior was altered to use weighting, then depending on the current weighting assigned to an AVF, each specific forwarder would get a specific load of the traffic.

The weighing can also be configured with lower and upper levels. These are then used to determine if an AVF should be forwarding. For example, if configured with a lower limit of 40 and an upper limit of 80, when the weighting on a device changed to be lower than 40, the AVF would stop forwarding. It would remain in this state until its weighting increased to above 80.

The weighting of specific AVFs can be controlled both statically and dynamically. When configured statically, the network administrator/engineer will configure a specific weighting to each AVF. When configured dynamically, GLBP uses the status of a track object to determine the current AVF weighting. Track objects can use a number of different criteria to determine their state (up or down). The most basic of these is interface line protocol state and interface IP routing capability (is an IP address configured?).

Summary

When considering whether to use an FHRP and which one to use, the initial decision comes down to the vendor of equipment that is being used on the devices. Because both HSRP and GLBP are Cisco proprietary, the obvious limitation is that the equipment being configured must be Cisco. VRRP, on the other hand, is standards-based and is supported on a number of different vendor’s platforms. Of the three, GLBP is certainly the one that provides the best solution in attempting to not waste any bandwidth and provide the lowest administrative burden overall; it all comes down to the vendor’s equipment deployed.

None of these three protocols is particularly complex to configure, and can be implemented in a very short amount of time. I hope that this article has provided enough of an introduction to GLBP to make a reasonably informed decision about whether GLBP is a solution that should be researched further. Introductory articles on HSRP and VRRP are also covered on this site, and can be referenced when attempting to make an informed decision about which of the three to select.

Cisco Press Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from Cisco Press and its family of brands. I can unsubscribe at any time.

Overview

Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about Cisco Press products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information

To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites; develop new products and services; conduct educational research; and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@ciscopress.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information

Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security

Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children

This site is not directed to children under the age of 13.

Marketing

Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information

If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out

Users can always make an informed choice as to whether they should proceed with certain services offered by Cisco Press. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.ciscopress.com/u.aspx.

Sale of Personal Information

Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents

California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure

Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links

This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact

Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice

We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020