Home > Articles > Cisco Certification > CCIE > CCIE Routing and Switching Practice Lab

CCIE Routing and Switching Practice Lab

Section 6: DLSw+ (4 Points)

  • Configure DLSw+ between VLAN2 and VLAN4; use routers R8 and R5. Peer from Lo0 on R8 and the VLAN4 interface on R5; ensure that R8 can accept DLSw+ connections from only unknown TCP peers.

  • Set up a one-line filter, which only allows common SNA traffic to egress from R5 VLAN4 into the DLSw+ network.

12. Section 7: IOS and IP Features (10 Points) | Next Section Previous Section