Home > Articles > Cisco Certification > CCNA Routing and Switching > CCNA Command Quick Reference: Routing and Routing Protocols

CCNA Command Quick Reference: Routing and Routing Protocols

Chapter Description

This chapter condenses the CCNA Routing commands into an easy-to-use chart for quick reference.

Default Routing

Router(config)#ip route 0.0.0.0 0.0.0.0 172.16.10.2

Send all packets destined for networks not in my routing table to 172.16.10.2

Router(config)#ip route 0.0.0.0 0.0.0.0 s0/0

Send all packets destined for networks not in my routing table out my Serial 0/0 interface

3. Verifying Static Routes | Next Section Previous Section