CCNA Command Quick Reference: Routing and Routing Protocols

Contents

  1. Static Routing
  2. Default Routing
  3. Verifying Static Routes
  4. Configuration Example: Static Routes

Chapter Description

This chapter condenses the CCNA Routing commands into an easy-to-use chart for quick reference.

From the Book

CCNA Command Quick Reference (Cisco Networking Academy Program)

CCNA Command Quick Reference (Cisco Networking Academy Program)

$22.91 (Save 15%)

Verifying Static Routes

Router#show ip route

Displays contents of IP routing table

NOTE

The codes to the left of the routes in the table tell you from where the router learned the routes. A static route is described by the letter S.

4. Configuration Example: Static Routes | Next SectionPrevious Section