CCNA Portable Command Guide: IPv6

Contents

  1. Assigning IPv6 Addresses to Interfaces
  2. IPv6 and RIPng
  3. Configuration Example: IPv6 RIP
  4. IPv6 Tunnels: Manual Overlay Tunnel
  5. Static Routes in IPv6
  6. Floating Static Routes in IPv6
  7. Verifying and Troubleshooting IPv6
  8. IPv6 Ping

Chapter Description

This chapter provides information and commands concerning a number of IPv6-related topics such as assigning IPv6 addresses to interfaces, IPv6 tunnels, and IPv6 ping.

From the Book

CCNA Portable Command Guide, 2nd Edition

CCNA Portable Command Guide, 2nd Edition

$27.99 (Save 20%)

Floating Static Routes in IPv6

NOTE

Although not part of the CCNA exam objectives, the concept of floating static routes in IPv6 is one that network administrators dealing with IPv6 need to be comfortable with.

To create a static route with an administrative distance (AD) set to 200, as opposed the default AD of one (1), enter the following command, for example:

Austin(config)# ipv6 route 2001:db8:c18:3::/64 fastethernet 0/0 200

The default ADs used in IPv4 are the same for IPv6.

7. Verifying and Troubleshooting IPv6 | Next SectionPrevious Section