larger cover

Add To My Wish List

Register your product to gain access to bonus material or receive a coupon.

CCNP Building Scalable Internetworks (BSCI 642-901) Lab Portfolio (Cisco Networking Academy)

Book

  • Sorry, this book is no longer in print.
Not for Sale
  • Description
  • Downloads
  • Sample Content
  • Updates
  • Copyright 2008
  • Edition: 1st
  • Book
  • ISBN-10: 1-58713-213-3
  • ISBN-13: 978-1-58713-213-1

CCNP Building Scalable Internetworks (BSCI 642-901) Lab Portfolio provides you with opportunities for hands-on practice to master the technologies necessary to configure advanced routing on a production network.

The labs reinforce your understanding of how to install, configure, monitor, and troubleshoot network infrastructure equipment. You will apply your knowledge of configuration of EIGRP, OSPF, IS-IS, and BGP routing protocols and how to manipulate and optimize routing updates between these protocols. Other topics covered include multicast routing, IPv6, and DHCP configuration.

Those preparing for the Building Scalable Cisco Internetworks (BSCI 642-901) certification exam should work through this book cover-to-cover. Or if you need to quickly review configuration examples, you can go directly to the relevant chapter.

CCNP Building Scalable Internetworks (BSCI 642-901) Lab Portfolio includes

  • 33 Labs built to support v5 of the Building Scalable Internetworks course within the Cisco® Networking Academy® curriculum providing ample opportunity to practice.
  • 6 Challenge and Troubleshooting Labs have been added to the Lab Portfolio to further test your mastery of the topics.
  • 4 Case Studies provide practice in planning, designing, and implementing EIGRP, OSPF, and BGP networks. Even if you do not have the actual equipment to configure these more complex topologies, it is worth reading through these labs to expand your thinking into more complex networking solutions.

By successfully completing the exercises in this book you will gain the experience necessary to use advanced IP addressing and routing in implementing scalability for Cisco integrated services routers (ISR) connected to LANs and WANs.

Table of Contents

Chapter 1 Scalable Network Design 1

Lab 1-1: BSCI Lab Configuration Guide (1.5.1) 1

Lab 1-2: TCL Script Reference and Demonstration (1.5.1) 3

    Quick TCL Reference 3

    Step 1: Initial Configuration 4

    Step 2: Verify Connectivity 5

    Step 3: Resolve Connectivity Issues 10

Conclusion 14

Chapter 2 EIGRP 15

Lab 2-1: EIGRP Configuration, Bandwidth, and Adjacencies (2.7.1) 15

    Scenario 15

    Step 1: Addressing 16

    Step 2: Configuring EIGRP Across VLAN1 17

    Step 3: Verifying the EIGRP Configuration 19

    Step 4: Configuring EIGRP on the Serial Interfaces 20

    Step 5: Configuring Network Statement Wildcard Masks 22

    Challenge: Topology Change 23

Lab 2-2: EIGRP Load Balancing (2.7.2) 26

    Scenario 26

    Step 1: Addressing and Serial Configuration 26

    Step 2: EIGRP Configuration 29

    Step 3: EIGRP Topology Table 32

    Step 4: Equal-Cost Load Balancing 34

    Step 5: Alternate EIGRP Paths Not in the Topology Table 35

    Step 6: Unequal-Cost Load Balancing 38

    Initial Configurations 45

    TCL Script Output 47

Lab 2-3: Summarization and Default Network Advertisement (2.7.3) 53

    Scenario 53

    Step 1: Initial Configuration 54

    Step 2: Summarization Analysis 57

    Step 3: EIGRP Auto-Summarization 61

    Step 4: EIGRP Manual Summarization 70

    Step 5: Default Network Advertisement 72

    Conclusion 77

    TCL Script Output 79

    Analyzing Major Networks 86

Lab 2-4: EIGRP Frame Relay Hub and Spoke: Router Used as Frame Switch (2.7.4) 89

    Scenario 90

    Step 1: Addressing 90

    Step 2: Configuring the Frame Relay Switch 91

    Step 3: Configuring the Frame Relay Endpoints 92

    Step 4: Setting Interface-Level Bandwidth 94

    Step 5: Configuring EIGRP 95

    Step 6: Using Nonbroadcast EIGRP Mode 99

    Step 7: Implementing EIGRP Manual Summarization 100

    TCL Script Output 102

Lab 2-5: EIGRP Frame Relay Hub and Spoke: Adtran Used as Frame Switch (2.7.4) 110

    Scenario 111

    Step 1: Addressing 111

    Step 2: Frame Relay Network 112

    Step 3: Configuring the Frame Relay Endpoints 113

    Step 4: Setting Interface-Level Bandwidth 114

    Step 5: Configuring EIGRP 115

    Step 6: Using Nonbroadcast EIGRP Mode 119

    Step 7: Implementing EIGRP Manual Summarization 120

    TCL Script Output 122

Lab 2-6: EIGRP Authentication and Timers (2.7.5) 131

    Scenario 131

    Step 1: Addressing 131

    Step 2: Configuring Basic EIGRP 133

    Step 3: Configuring Authentication Keys 134

    Step 4: Configuring EIGRP Link Authentication 135

    Step 5: Manipulating EIGRP Timers 139

    TCL Script Output 142

Lab 2-7: EIGRP Challenge Lab (2.7.6) 147

Lab 2-8: EIGRP Troubleshooting Lab (2.7.7) 148

    Initial Configurations 148

Chapter 3 OSPF 151

Lab 3-1: Single-Area OSPF Link Costs and Interface Priorities (3.11.1) 151

    Scenario 151

    Step 1: Addressing 152

    Step 2: Adding Physical Interfaces to OSPF 153

    Step 3: OSPF show Commands 154

    Step 4: Adding Loopback Interfaces to OSPF 157

    Step 5: Modifying Link Costs in OSPF 159

    Step 6: Modifying Interface Priorities 161

    Challenge: Topology Change 162

    TCL Script Verification 163

Lab 3-2: Multiple-Area OSPF with Stub Areas and Authentication (3.11.2) 167

    Scenario 167

    Step 1: Addressing 167

    Step 2: Adding Interfaces into OSPF 168

    Step 3: Stub Areas 171

    Step 4: Totally Stubby Areas 173

    Step 5: Not So Stubby Areas 176

    Step 6: OSPF Interface Authentication 181

    TCL Script Output 182

Lab 3-3: OSPF Virtual Links and Area Summarization (3.11.3) 187

    Scenario 187

    Step 1: Addressing 188

    Step 2: Adding Interfaces into OSPF 189

    Step 3: Creating a Virtual Link 190

    Step 4: Summarizing an Area 193

    Step 5: Generating a Default Route into OSPF 195

    Challenge: Configure OSPF Authentication 197

    TCL Connectivity Verification 197

Lab 3-4: OSPF over Frame Relay Using a Router as the Frame Relay Switch (3.11.4a) 202

    Scenario 203

    Step 1: Addressing 203

    Step 2: Setting Up NBMA OSPF 204

    Step 3: Changing the Network Type to Point-to-Multipoint 205

    Step 4: Changing OSPF Timers 207

    Challenge: Minimal Hello Intervals 208

    TCL Connectivity Verification 209

Lab 3-5: OSPF Over Frame Relay Using an Adtran as the Frame Relay Switch (3.11.4b) 213

    Scenario 213

    Step 1: Addressing 214

    Step 2: Setting Up NBMA OSPF 215

    Step 3: Changing the Network Type to Point-to-Multipoint 216

    Step 4: Changing OSPF Timers 218

    Challenge: Minimal Hello Intervals 219

    TCL Connectivity Verification 220

Lab 3-6: OSPF Challenge Lab (3.11.5) 224

Lab 3-7: OSPF Troubleshooting Lab (3.11.6) 225

    Initial Configurations 226

Chapter 4 IS-IS 229

Lab 4-1: Configuring Basic Integrated IS-IS (4.7.1) 229

    Scenario 229

    Step 1: Addressing and Basic Connectivity 230

    Step 2: Configuring Basic IS-IS 230

    Step 3: Verifying IS-IS Adjacencies and Operation 231

    Step 4: Converting to the IS-IS Backbone 237

    Step 5: Manipulating the IS-IS Interface Timers 239

    Step 6: Implementing IS-IS L2 Core Authentication 240

    Step 7: Implementing IS-IS Domain Authentication 241

    TCL Script Output 243

Lab 4-2 Multi-Area Integrated IS-IS (4.7.2) 246

    Scenario 246

    Step 1: Addressing and Initial Configuration 246

    Step 2: Verify IS-IS Initial Operation 247

    Step 3: Configure IS-IS Area 2 248

    Step 4: Verify IS-IS Multi-Area Operation 248

    Step 5: Configure IS-IS Domain Authentication 250

    Step 6: Reconfigure IS-IS Area 1 251

    Step 7: Reconfigure R3 IS-IS Operation 254

    Step 8: Verify IS-IS Intra-Area Operation 255

    Reflection 257

    TCL Script Output 257

Lab 4-3: Configuring IS-IS over Frame Relay: Router Used as Frame Switch (4.7.3a) 260

    Scenario 261

    Step 1: Addressing and Basic Configuration 261

    Step 2: Frame Relay Configuration 261

    Step 3: Configure and Verify IS-IS over Frame Relay 263

    Step 4: Verify IS-IS Connectivity 265

    Step 5: Demonstrate IS-IS Interface-Type Mismatch 265

    Router as Frame Relay Switch Configuration 267

    TCL Script Output 268

Lab 4-4: Configuring IS-IS over Frame Relay: Adtran Used as Frame Switch

(4.7.3b) 271

    Scenario 271

    Step 1: Addressing and Basic Configuration 271

    Step 2: Frame Relay Configuration 272

    Step 3: Configure and Verify IS-IS over Frame Relay 274

    Step 4: Verify IS-IS Connectivity 276

    Step 5: Demonstrate IS-IS Interface-Type Mismatch 276

    TCL Script Output 278

Chapter 5 Route Optimization 281

Lab 5-1: Redistribution Between RIP and OSPF (5.6.1) 281

    Scenario 282

    Step 1: Assign Addresses 282

    Step 2: Configure RIPv2 284

    Step 3: Configure Passive Interfaces in RIP 286

    Step 4: Summarize a Supernet with RIP 288

    Step 5: Suppress Routes Using Prefix Lists 290

    Step 6: Configure OSPF 292

    Step 7: Configure Passive Interfaces in OSPF 293

    Step 8: Allow One-Way Redistribution 295

    Step 9: Redistribute Between Two Routing Protocols 297

    Step 10: Set a Default Seed Metric 297

    Step 11: Change the OSPF External Network Type 298

    Challenge: Use Extended Access Lists for Filtering 299

    TCL Script Output: Steps 8 and 9 300

Lab 5-2 Redistribution Between EIGRP and OSPF (5.6.2) 307

    Scenario 307

    Step 1: Additional Addressing 308

    Step 2: Configuring EIGRP 308

    Step 3: Create Passive Interfaces in EIGRP 309

    Step 4: Manually Summarize with EIGRP 311

    Step 5: Additional OSPF Configuration 312

    Step 6: Summarize OSPF Areas at the ABR 314

    Step 7: Mutually Redistribute Between OSPF and EIGRP 315

    Step 8: Filter Redistribution with Route Maps 319

    Step 9: Summarize External Routes into OSPF at the ASBR 320

    Step 10: Modifying EIGRP Distances 321

    Step 11: Modifying OSPF Distances 322

    Challenge: Change Administrative Distance on R2 324

    TCL Script Output 325

    Exploring Black Hole Operation 333

Lab 5-3: Redistribution Between EIGRP and IS-IS (5.6.3) 337

    Scenario 337

    Step 1: Assign Addresses 338

    Step 2: Configure EIGRP 339

    Step 3: Configure IS-IS 340

    Step 4: Mutually Redistribute Between IS-IS and EIGRP 342

    Step 5: Filter Network Addresses with Route Maps 344

    Step 6: Filter Prefixes with Route Maps 347

    Step 7: Summarize Addresses in IS-IS 349

    TCL Script Output 350

Lab 5-4: Manipulating Administrative Distances (5.6.4) 357

    Scenario 357

    Pre-Lab: Review of Administrative Distances 358

    Step 1: Configure Addressing 358

    Step 2: Configure RIP 359

    Step 3: Configure OSPF 362

    Step 4: Modify a Routing Protocol’s Distance 366

    Step 5: Modify Distance Based on Route Source 368

    Step 6: Modify Distance Based on an Access List 370

    Challenge 373

Lab 5-5: Configuring the Cisco IOS DHCP Server (5.6.5) 374

    Scenario 374

    Step 1: Assign IP Addresses 374

    Step 2: Configure EIGRP 375

    Step 3: Configure a DHCP Pool 376

    Step 4: Verify DHCP Lease on Client 379

    Step 5: Verify DHCP Configuration on Server 380

    Step 6: DHCPRELEASE and DHCPRENEW 381

    Step 7: Configure the IP Helper Address 385

    Challenge: Apply Per-Protocol Forwarding 386

    Chapter 6 BGP 387

Lab 6-1: Configuring BGP with Default Routing (6.7.1) 387

    Scenario 387

    Step 1: Assign IP Addresses 387

    Step 2: Configure the ISPs 388

    Step 3: Configure SanJose BGP 388

    Step 4: Verify BGP on the SanJose Router 389

    Step 5: Filter Routes 390

    Step 6: Configure the Primary and Backup Routes Using Floating Static

    Routes 390

    Step 7: Configure Primary and Backup Routes Using Static Routes 392

    TCL Verification 395

Lab 6-2: Using the AS_PATH Attribute (6.7.2) 399

    Scenario 399

    Step 1: IP Addressing 399

    Step 2: Configure BGP 400

    Step 3: Remove the Private AS 400

    Step 4: Use the AS_PATH Attribute to Filter Routes 401

    TCL Output 402

Lab 6-3: Configuring IBGP and EBGP Sessions, Local Preference, and

MED (6.7.3) 406

    Scenario 406

    Step 1: IP Addressing 406

    Step 2: Configure EIGRP 407

    Step 3: Configure IBGP 407

    Step 4: Verify BGP Neighbors 407

    Step 5: Configure EBGP 407

    Step 6: Verify BGP Neighbors 408

    Step 7: View BGP Summary Output 408

    Step 8: Verify Which Path Traffic Takes 408

    Step 9: BGP Next-Hop_Self 412

    Step 10: Set BGP Local Preference 414

    Step 11: Set BGP MED 415

    Step 12: Establish a Default Network 419

    TCL Verification 420

Lab 6-4: BGP Route Reflectors and Route Filters (6.7.4) 425

    Scenario 425

    Step 1: Configure RIPv2 425

    Step 2: IBGP Peers and Route Reflectors 426

    Step 3: Inject an External Route into BGP 427

    Step 4: Inject a Summary Address into BGP 428

    TCL Verification 429

Chapter 7 IP Multicasting 433

Lab 7-1: Implementing IGMP and IGMP Snooping (7.5.1) 433

    Scenario 433

    Overview 433

    Step 1: Configure Hosts on a LAN 434

    Step 2: Subscribe Interfaces to Multicast Groups with IGMP 434

    Step 3: Verify IGMP Snooping on the Switch 439

    Step 4: Configure a Multicast-Enabled Router on the VLAN 440

    Step 5: Verify Multicast Operation at Layer 2 443

    Step 6: Verify IGMP Snooping 444

    Step 7: Verify Multicast Operation at Layer 3 446

Lab 7-2: Routing IP Multicast with PIM Dense Mode (7.5.2) 447

    Scenario 447

    Step 1: Configure Addressing and Implement IGMP 448

    Step 2: Configure EIGRP 451

    Step 3: Implement PIM-DM 451

    Step 4: Verify PIM Adjacencies 455

    Step 5: Verify Multicast Routing Operation 458

    Step 6: Verify PIM-DM Flood-and-Prune Behavior 463

    Step 7: Explore the Multicast Routing Table 466

    Challenge 468

    TCL Script Output: Unicast 468

Lab 7-3: Routing IP Multicast with PIM Sparse Mode (7.5.3) 474

    Scenario 474

    Step 1: Load Initial Configurations 474

    Step 3: Implement PIM-SM 478

    Step 4: Verify PIM Adjacencies 483

    Step 5: Verify Multicast Routing Operation 485

    Step 6: Verify PIM-SM Registration and SPT Cutover 490

    Conclusion 493

Lab 7-4: Routing IP Multicast with PIM Sparse-Dense Mode (7.5.4) 496

    Scenario 496

    Step 1: Configure Addressing and Implement IGMP 497

    Step 2: Configure Single-Area OSPF 500

    Step 3: Implement PIM Sparse-Dense Mode 500

    Step 4: Configure PIM Auto-RP 505

    Step 5: Verify the RP Mappings 509

    Step 6: Verify Multicast Operation 511

    Step 7: Explore Auto-RP Operation with Sparse-Dense Mode 513

    Step 8: Verify the Operation of Dense-Mode Fallback 515

    TCL Script Output 520

Chapter 8 IPv6 527

Lab 8-1: Configuring OSPF for IPv6 (8.7.1) 527

    Scenario 527

    Step 1: Configuring the Loopback Interfaces 527

    Step 2: Configuring Static IPv6 Addresses 528

    Step 3: Changing the Link-Local Address on an Interface 529

    Step 4: Configuring EUI-64 Addresses 531

    Step 5: Enabling IPv6 Routing and CEF 533

    Step 6: Setting Up OSPFv3 533

    Challenge: Summarizing OSPFv3 Areas 539

    TCL Script Output 539

Lab 8-2: Using Manual IPv6 Tunnels (8.7.2) 544

    Scenario 544

    Step 1: Configure Loopbacks and Physical Interfaces 544

    Step 2: Configure EIGRP 545

    Step 3: Configure a Manual IPv6 Tunnel 545

    Step 4: Configure OSPFv3 Over a Tunnel 546

    TCL Script Output 547

Lab 8-3: Configuring 6to4 Tunnels (8.7.3) 552

    Scenario 552

    Step 1: Configure Loopbacks and Physical Interfaces 552

    Step 2: Configure EIGRP 553

    Step 3: Configure a Manual IPv6 Tunnel 553

    Step 4: Configure Static IPv6 Routes 554

    TCL Script Output 556

Lab 8-4: IPv6 Challenge Lab 561

Lab 8-5: IPv6 Troubleshooting Lab 562

    Initial Configurations 562

Chapter 9 Case Studies 565

Case Study 1: EIGRP 565

Case Study 2: OSPF: Four Routers 566

Case Study 3: OSPF: Five Routers 568

Case Study 4: BGP 570

Cisco Press Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from Cisco Press and its family of brands. I can unsubscribe at any time.

Overview

Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about Cisco Press products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information

To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites; develop new products and services; conduct educational research; and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@ciscopress.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information

Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security

Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children

This site is not directed to children under the age of 13.

Marketing

Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information

If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out

Users can always make an informed choice as to whether they should proceed with certain services offered by Cisco Press. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.ciscopress.com/u.aspx.

Sale of Personal Information

Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents

California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure

Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links

This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact

Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice

We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020