Home > Articles > IP Routing in the LAN

IP Routing in the LAN

Chapter Description

In this sample chapter from CCNA 200-301 Official Cert Guide, Volume 1, Wendell Odom discusses the configuration and verification steps related to three methods of routing between VLANs with three major sections: VLAN Routing with Router 802.1Q Trunks, VLAN Routing with Layer 3 Switch SVIs, and VLAN Routing with Layer 3 Switch Routed Ports.

From the Book

CCNA 200-301 Official Cert Guide, Volume 1

CCNA 200-301 Official Cert Guide, Volume 1

$35.99 (Save 20%)

Review All the Key Topics

key_topic_icon.jpg

Table 17-3 Key Topics for Chapter 17

Key Topic Element

Description

Page Number

Figure 17-2

Concept of VLAN subinterfaces on a router

396

List

Two alternative methods to configure the native VLAN in a ROAS configuration

398

List

Troubleshooting suggestions for ROAS configuration

401

Figure 17-3

Layer 3 switching with SVIs concept and configuration

402

List

Troubleshooting suggestions for correct operation of a Layer 3 switch that uses SVIs

405

Figure 17-4

Layer 3 switching with routed ports concept and configuration

407

List

show commands that list Layer 3 routed ports in their output

408

Figure 17-7

Layer 3 EtherChannel concept and configuration

411

List

List of configuration settings that must be consistent before IOS will bundle a link with an existing Layer 3 EtherChannel

414

7. Key Terms You Should Know | Next Section Previous Section

There are currently no related articles. Please check back later.