Home > Articles > Physical and Logical Infrastructure Requirements

Physical and Logical Infrastructure Requirements

Chapter Description

In this sample chapter from CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide, 2nd Edition, the authors cover physical and logical infrastructure requirements including powering an access point with Power over Ethernet (PoE) and the communication flow of CAPWAP control and data channels. This chapter covers ENWLSD exam topics 2.1-2.2.

Exam Preparation Tasks

You have a couple of choices for exam preparation: the following review sections, Chapter 18, “Final Preparation,” and the exam practice questions on the companion website.

Review All Key Topics

Review the most important topics in this chapter, noted with the Key Topic icon in the outer margin of the page. Table 4-5 lists these key topics and the page numbers on which each is found.

key_topic.jpg

Table 4-5 Key Topics for Chapter 4

Key Topic Element

Description

Page Number

Table 4-2

Summary of Power over Ethernet Standards and Capabilities

74

Table 4-3

Supported mGig Speeds with Associated Cable Categories

76

Figure 4-9

CAPWAP Control and Data Plane Channels

81

Table 4-4

Summary of AAA and DHCP Services and Ports Used for the Wireless Infrastructure

83

7. Define Key Terms | Next Section Previous Section

Cisco Press Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from Cisco Press and its family of brands. I can unsubscribe at any time.