Home > Articles > Cisco Network Technology > Network Architecture & Design > Analyzing Business Goals and Constraints of Network Design

Analyzing Business Goals and Constraints of Network Design

  • Sample Chapter is provided courtesy of Cisco Press.
  • Date: Aug 6, 2004.

Contents

  1. Using a Top-Down Network Design Methodology
  2. Analyzing Business Goals
  3. Analyzing Business Constraints
  4. Business Goals Checklist
  5. Summary

Chapter Description

This chapter covers typical network design business goals and constraints and talks about the top-down process for gathering information on goals, and the importance of using systematic methods for network design.

This chapter serves as an introduction to the rest of the book by describing top-down network design. The first section explains how to use a systematic, top-down process when designing computer networks for your customers. Depending on your job, your customers might be other departments within your company, those to whom you are trying to sell products, or clients of your consulting business.

After describing the methodology, this chapter focuses on the first step in top-down network design: analyzing your customer's business goals. Business goals include the capability to run network applications to meet corporate business objectives, and the need to work within business constraints, such as budgets, limited networking personnel, and tight timeframes.

This chapter also covers an important business constraint that some people call the eighth layer of the Open Systems Interconnection (OSI) reference model: workplace politics. To ensure the success of your network design project, you should gain an understanding of any corporate politics and policies at your customer's site that could affect your project.

The chapter concludes with a checklist to help you determine if you have addressed the business issues in a network design project.

Using a Top-Down Network Design Methodology

According to Albert Einstein:

The world we've made as a result of the level of thinking we have done thus far creates problems that we cannot solve at the same level at which we created them.

To paraphrase Einstein, networking professionals have the ability to create networks that are so complex that when problems arise they can't be solved using the same sort of thinking that was used to create the networks. Add to this the fact that each upgrade, patch, and modification to a network can also be created using complex and sometimes convoluted thinking, and you realize that the result is networks that are hard to understand and troubleshoot. The networks created with this complexity often don't perform as well as expected, don't scale as the need for growth arises (as it almost always does), and don't match a customer's requirements. A solution to this problem is to use a streamlined, systematic methodology in which the network or upgrade is designed in a top-down fashion.

Many network design tools and methodologies in use today resemble the "connect-the-dots" game that some of us played as children. These tools let you place internetworking devices on a palette and connect them with local-area network (LAN) or wide-area network (WAN) media. The problem with this methodology is that it skips the steps of analyzing a customer's requirements and selecting devices and media based on those requirements.

Good network design must recognize that a customer's requirements embody many business and technical goals including requirements for availability, scalability, affordability, security, and manageability. Many customers also want to specify a required level of network performance, often called a service level. To meet these needs, difficult network design choices and tradeoffs must be made when designing the logical network before any physical devices or media are selected.

When a customer expects a quick response to a network design request, a bottom-up (connect-the-dots) network design methodology can be used, if the customer's applications and goals are well known. However, network designers often think they understand a customer's applications and requirements only to discover, after a network is installed, that they did not capture the customer's most important needs. Unexpected scalability and performance problems appear as the number of network users increases. These problems can be avoided if the network designer uses top-down methods that perform requirements analysis before technology selection.

Top-down network design is a methodology for designing networks that begins at the upper layers of the OSI reference model before moving to the lower layers. It focuses on applications, sessions, and data transport before the selection of routers, switches, and media that operate at the lower layers.

The top-down network design process includes exploring divisional and group structures to find the people for whom the network will provide services and from whom you should get valuable information to make the design succeed.

Top-down network design is also iterative. To avoid getting bogged down in details too quickly, it is important to first get an overall view of a customer's requirements. Later, more detail can be gathered on protocol behavior, scalability requirements, technology preferences, and so on. Top-down network design recognizes that the logical model and the physical design may change as more information is gathered.

Because top-down methodology is iterative, some topics are covered more than once in this book. For example, this chapter discusses network applications. Network applications are discussed again in Chapter 4, "Characterizing Network Traffic," which covers network traffic caused by application- and protocol-usage patterns. A top-down approach lets a network designer get "the big picture" first and then spiral downward into detailed technical requirements and specifications.

Using a Structured Network Design Process

Top-down network design is a discipline that grew out of the success of structured software programming and structured systems analysis. The main goal of structured systems analysis is to more accurately represent users' needs, which are unfortunately often ignored or misrepresented. Another goal is to make the project manageable by dividing it into modules that can be more easily maintained and changed.

Structured systems analysis has the following characteristics:

  • The system is designed in a top-down sequence.

  • During the design project, several techniques and models can be used to characterize the existing system, new user requirements, and a structure for the future system.

  • A focus is placed on understanding data flow, data types, and processes that access or change the data.

  • A focus is placed on understanding the location and needs of user communities that access or change data and processes.

  • A logical model is developed before the physical model. The logical model represents the basic building blocks, divided by function, and the structure of the system. The physical model represents devices and specific technologies and implementations.

With large network design projects, modularity is essential. The design should be split functionally to make the project more manageable. For example, the functions carried out in campus LANs can be analyzed separately from the functions carried out in remote-access networks, virtual private networks (VPNs), and WANs.

Cisco Systems recommends a modular approach with its three-layer hierarchical model. This model divides networks into core, distribution, and access layers. Cisco's Secure Architecture for Enterprises (SAFE) and Enterprise Composite Network Model (ECNM), which are discussed in Part II of this book, "Logical Network Design," are also modular approaches to network design.

With a structured approach to network design, each module is designed separately, yet in relation to other modules. All the modules are designed using a top-down approach that focuses on requirements, applications, and a logical structure before the selection of physical devices and products to implement the design.

Systems Development Life Cycles

Systems analysis students are familiar with the concept that typical systems are developed and continue to exist over a period of time, often called a systems development life cycle. Many systems analysis books use the acronym SDLC to refer to the life cycle, which may sound strange to networking students who know SDLC as Synchronous Data Link Control, a bit-oriented, full-duplex protocol used on synchronous serial links, often found in a legacy Systems Network Architecture (SNA) environment. Nevertheless, it's important to realize that most systems, including network systems, follow a cyclical set of phases, where the system is planned, created, tested, and optimized.

Feedback from the users of the system causes the system to then be re-created or modified, tested, and optimized again. New requirements arise as the network opens the door to new uses. As people get used to the new network and take advantage of the services it offers, they soon take it for granted and expect it to do more.

In this book, network design is divided into four major phases that are carried out in a cyclical fashion:

  • Analyze requirements. In this phase, the network analyst interviews users and technical personnel to gain an understanding of the business and technical goals for a new or enhanced system. The task of characterizing the existing network, including the logical and physical topology and network performance, follows. The last step in this phase is to analyze current and future network traffic, including traffic flow and load, protocol behavior, and quality of service (QoS) requirements.

  • Develop the logical design. This phase deals with a logical topology for the new or enhanced network, network layer addressing, naming, and switching and routing protocols. Logical design also includes security planning, network management design, and the initial investigation into which service providers can meet WAN and remote access requirements.

  • Develop the physical design. During the physical design phase, specific technologies and products to realize the logical design are selected. Also, the investigation into service providers, which began during the logical design phase, must be completed during this phase.

  • Test, optimize, and document the design. The final steps in top-down network design are to write and implement a test plan, build a prototype or pilot, optimize the network design, and document your work with a network design proposal.

These major phases of network design repeat themselves as user feedback and network monitoring suggest enhancements or the need for new applications. Figure 1-1 shows the network design and implementation cycle.

Figure 1Figure 1-1 Network Design and Implementation Cycle

The Plan Design Implement Operate Optimize (PDIOO) Network Life Cycle

Cisco Systems teaches the Plan Design Implement Operate Optimize (PDIOO) set of phases for the life cycle of a network. It doesn't matter exactly which life cycle you use, as long as you realize that network design should be accomplished in a structured, planned, modular fashion, and that feedback from the users of the operational network should be fed back into new network projects to enhance or redesign the network. Learning the Cisco steps is important if you are studying for a Cisco design certification. For that reason, the steps are listed here:

  • Plan. Network requirements are identified in this phase. This phase also includes an analysis of areas where the network will be installed and an identification of users who will require network services.

  • Design. In this phase, the network designers accomplish the bulk of the logical and physical design, according to requirements gathered during the plan phase.

  • Implement. After the design has been approved, implementation begins. The network is built according to the design specifications. Implementation also serves to verify the design.

  • Operate. Operation is the final test of the effectiveness of the design. The network is monitored during this phase for performance problems and any faults, to provide input into the optimize phase of the network life cycle.

  • Optimize. The optimize phase is based on proactive network management which identifies and resolves problems before network disruptions arise. The optimize phase may lead to a network redesign if too many problems arise due to design errors or as network performance degrades over time as actual use and capabilities diverge. Redesign may also be required when requirements change significantly.

  • Retire. When the network, or a part of the network, is out-of-date, it may be taken out of production. Although Retire is not incorporated into the name of the life cycle (PDIOO), it is nonetheless an important phase.

Figure 1-2 shows a graphical representation of the Cisco PDIOO network life cycle.

Figure 2Figure 1-2 PDIOO Network Life Cycle


2. Analyzing Business Goals | Next Section

Cisco Press Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from Cisco Press and its family of brands. I can unsubscribe at any time.

Overview

Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about Cisco Press products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information

To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites; develop new products and services; conduct educational research; and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@ciscopress.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information

Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security

Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children

This site is not directed to children under the age of 13.

Marketing

Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information

If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out

Users can always make an informed choice as to whether they should proceed with certain services offered by Cisco Press. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.ciscopress.com/u.aspx.

Sale of Personal Information

Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents

California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure

Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links

This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact

Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice

We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020