Home > Articles > Cisco Network Technology > Security > Getting Familiar with Cisco Secure Access Control Server

Getting Familiar with Cisco Secure Access Control Server

  • Sample Chapter is provided courtesy of Cisco Press.
  • Date: Dec 3, 2004.

Chapter Description

This chapter covers the basics of the Cisco Secure Access Control Server interface, and familiarizes you with the very simplest of actions in this medium.
In this chapter, you learn the following topics: - Title Page

In this chapter, you learn the following topics:

  • Navigating the HTML interface

  • Starting point for configuring your server

  • Locating configuration items

  • Preparing to add users

If you recall during the installation process of Access Control Server (ACS), you were given the opportunity to enable advanced configuration options by enabling a check box. As I look back to my first install and navigation of ACS, this spot is where I thought to myself, "I'll get to it later."

As it turns out, I should have gotten to it sooner because by enabling those check boxes, more configuration items are visible in the HTML interface. For example, when I attempted to configure some authorization parameters, the options were not visible, and I spent a good hour or better trying to figure out what I did.

In this chapter, you familiarize yourself with the interface of ACS and apply some basic configuration to make your job as an administrator a little bit easier.


I assume throughout the course of this chapter that you have followed the install of ACS according to the laboratory example in Chapter 5, "Deploying Cisco Secure Access Control Server for Windows Server." If you are using a Cisco Secure Solution Engine, you might have some slight differences. All in all, the HTML interface of the Cisco Secure Solution Engine and the software version of ACS for Windows Server should be close to identical.

Navigating the HTML Interface

If this is your first time using ACS, it is important to take the time to learn how to navigate the interface.

Note that the main web page of ACS is divided into frames. You access different menu items on the left-hand side of the page, perform configuration in the middle, and have access to some help on the right-hand side.

Because you use the menu a great deal in you configurations, the next sections look at each menu item and what types of configuration can be performed at each level.

User Setup

When you select the User Setup menu item, your middle frame changes to the "select" screen. Here, you can do a few things. You can add a new user, search for an existing user, find users alphabetically or numerically, or simply list all users at one time. User Setup is seen in Figure 6-1.

Figure 1Figure 6-1 User Setup

To begin your configuration, add a username. To do so, follow these steps:

Step 1

Enter a username; for our example, use aaauser and select the Add/Edit button.

Step 2

Now, you can edit user attributes. Moving from top to bottom, you can disable a user account, enter supplementary information, and configure the user's passwords. Figure 6-2 displays the option for authenticating against a Windows NT/2000 database or the Cisco Secure Database.

Step 3

Enter the password cisco for this user. Optionally, you could select the option to use the Windows database. The default is to check the Cisco Secure database.


Here, you can also distinguish which group the user is a member of. By not specifying a group, the user is placed in the default group (group 0). You can have the same attributes to configure in the group setup as you have in the individual user setup; however, user configurations override that of the group of which they are a member.


Within User Setup, you can also configure callback settings, IP address assignment, and account disable properties. Some of the more advanced user attributes and configurations are discussed in Chapter 7, "Configuring User Accounts."

Step 4

Click Submit to create your first AAA user in ACS. Because you have not selected a group, this user is placed in the default (group 0) group.

Figure 2Figure 6-2 Authentication Location Options


By selecting the List All Users button after creating your user, you should see a single user entry on the right-hand side of the ACS interface. This ensures that the entry has been successfully created.

Group Setup

To begin your configuration, recap what you have configured thus far. You have a user called aaauser who has a password of cisco and is placed in the default group. This user is authenticated to the Cisco Secure database only. To examine the group that this user is in, follow these steps:

Step 1

Select the Group Setup menu item. You are given three options there. Figure 6-3 shows these options.


The options are Users in Group, Edit Settings, and Rename Group. Users in Group lists all of the users that are assigned to the group that is visible in the drop-down menu. A total of 500 groups numbered 0 through 499 exist.

Step 2

To view the group settings that your first AAA user is a member of (by default), simply select the 0:Default Group and then select Edit Settings. This selection changes the main window, and you are now in the Group Configuration section. This is seen in Figure 6-4.

You can note a few highlights while you are here. First of all, take a look at jump to at the top of the screen. This feature is a real time saver. Try it out a few times by jumping to the IP address assignment section and then back to access restrictions. Notice that in the group configuration you have the ability to configure time-of-day access restrictions. This is not available at the user level. You can also configure Callback, IP Assignment, and TACACS+ settings. Under TACACS+ Settings you can configure shell command authorizations, apply privilege levels, set auto-commands, and so on. These types of configurations are discussed in Chapter 8, "Configuring User Groups," and Chapter 10, "Configuring Shared Profile Components."


Some of the fields might not be visible in either the Group Setup or User Setup. As you become more familiar with ACS, you will be able to enable or disable certain fields at either the group level or the user level. This capability is explained in detail in Chapter 7 and Chapter 8, so do not worry if some of the items discussed in this chapter are not visible in you ACS device.

When you make group changes, you are required to submit and restart the ACS services. Your changes do not take place until you have done so. If you are making multiple changes to a group, it is best to submit without restart after each change until you have completed all changes, and then restart the ACS services.

Figure 3Figure 6-3 Group Setup

Figure 4Figure 6-4 Configuring the Default Group

Shared Profile Components

Shared Profile Components allows you to specify Shell Command Authorization Sets and PIX Shell Command Authorization Sets. By creating these command authorization sets, you can control the commands a user can execute on a device by applying the command authorization set to the user profile in the TACACS+ settings, or at the group level. Figure 6-5 displays the Shared Profiles Components configuration menu. By default, you can select Shell Command Authorization Sets and PIX Shell Command Authorization Sets. Optionally, you can configure Downloadable ACLs or Management Center Authorization Sets. For these options to be visible, you must select them in the Interface Configuration page.

Another benefit to the Shared Profile Components configuration page is the ability to configure Shared Network Access Restrictions.

Figure 5Figure 6-5 Shared Profile Components

By selecting one of these links, for example, Shell Command Authorization Sets, you are taken to the configuration page for this shared profile component. This configuration is discussed in Chapter 10. You can see what this configuration page looks like in Figure 6-6. As you can tell, at this point, none are defined.

Figure 6Figure 6-6 Shell Command Authorization Sets

Network Configuration

The Network Configuration section is where you add, delete, or modify settings for AAA clients. At least one entry in this section should be placed there during install of ACS. You can see this in Figure 6-7. The AAA client is the device you added during the install. The AAA server is the Windows server, or rather the ACS server itself, that is entered here during the server installation.

Figure 7Figure 6-7 Network Configuration

By selecting that entry, note that you can control the IP address of the device, key, and authentication method. You can also see a total of four check boxes in Figure 6-8. They are as follows:

  • Single Connect TACACS+ AAA Client (Record stop in accounting on failure)—Single Connect TACACS+ AAA Client allows a single TCP connection between this AAA client and ACS. The normal operation is to establish a separate TCP connection for each request. For example, if you are using TACACS+, and you have a user that connects to the AAA client, when authentication occurs, a TCP connection is established. When another user connects, another session is established and so on. This eliminates those multiple TCP sessions. However, this is not recommended unless the connection between the TACACS+ AAA client and ACS is extremely reliable. If you decide to use this option, and the connection between the ACS and TACACS+ AAA client goes down, ACS never receives accounting stop packets for all users accessing the network through that AAA client. This causes them to remain in the logged in users list until it's purged. The logged in users list is covered in Chapter 12, "Reports and Logging for Windows Server."

  • Log Update/Watchdog Packets from this AAA Client—The Log Update/Watchdog Packets from this AAA Client allows accounting packets that are sent by the AAA client to be logged by ACS, specifically the logging of update or watchdog packets. It does not control overall logging of accounting packets. Watchdog packets are a means of creating better session length granularity to safeguard against the possibility of a device going down and thus never sending accounting stop packets for the users accessing the network via that device. Customers who have high priority on maintaining session length data might find this more useful than others.

  • Log RADIUS Tunneling Packets from this AAA Client—The Log RADIUS Tunneling Packets from this AAA Client option allows RADIUS tunneling packets from the AAA client to be logged by ACS.

  • Replace RADIUS Port Info with Username from this AAA Client—This enables the use of a username rather than port numbers for session state tracking. This option is useful when the AAA client cannot provide unique port values. For example, if you use the Cisco Secure ACS IP Pools server and the AAA client does not provide a unique port for each user, Cisco Secure ACS assumes that a reused port number indicates that the previous user session has ended, and Cisco Secure ACS can reassign the IP address previously assigned to the session with the non-unique port number. By default, this check box is not selected.

When you make changes to an AAA client, you must submit and restart the ACS services, similar to group changes. If you want to delete an AAA client, you are also required to submit and restart the service for changes to take effect.

System Configuration

Under System Configuration, you find many sub-configuration links beginning with Service Control. These sub-configuration links can be seen in Figure 6-9. This is where you can stop and start the ACS services. You can also do so in the Service Control of Windows 2000. By stopping the ACS service inside of ACS, you do not stop the ACS web server. If you want to stop the ACS web server, you need to do so in the Service Control of Windows. This web service is called CSAdmin.

The next System Configuration feature that you can manipulate is Logging. In this feature is where you can configure the local logging configuration, such as failed attempts and TACACS+ and RADIUS Accounting. You also configure Open DataBase Connectivity (ODBC) and remote logging here, as well as other ACSs.

Date Format control is straightforward. This is where you can change the format of the date displayed on reports. After you change the format, you must log out of the server to actually see the changes take place.

Figure 8Figure 6-8 AAA Client Setup for ACS

Figure 9Figure 6-9 System Configuration

You can log out of ACS, short of closing the browser, in a few ways. One way is by clicking the Cisco Systems logo in the top left corner of the web browser screen and then selecting the Log off button. Another method is by clicking on the X in the top right portion of the window.

The next option is Local Password Management. From here you can set password length, as well as password options. You can also configure options for Remote Password Change and logging of password changes.

As for ACS Backup, you can schedule backups to be done manually or at specific times. You can specify a location for the backup files to be stored as well as manage the files. When ACS is backed up, it creates a file with the extension of .dmp. This file is now present when you enter the ACS Restore link. Here you have the ability to select from numerous backup files, as well as determine if you want to restore the Users and Groups, System Configuration, or both.

ACS Service Management enables the administrator to determine how often to test the availability of ACS authentication services. This is the CSMon service configuration. This allows ACS to test itself and take action when its test is unsuccessful. The available actions, should no authentications be recorded, are as follows:

  • Restart all


  • Reboot

  • Take no action

If the reboot option is selected, this causes the server that is running ACS to reboot. You also have the ability to add custom actions to this list.

You can also decide that you want to log attempts to log in to disabled accounts. Do this by selecting the check box labeled Generate event when an attempt is made to log in to a disabled account.

This is also where you can configure e-mail notifications and NT Event Log setup.

The ACS Certificate Setup is where you configure the ACS device with digital certificates. You use this when you configure the ACS to use https for administrative sessions.

Global Authentication Setup is where you can allow protocols such as PEAP, EAP-TLS, EAP-MD5, and MS-CHAP.

Interface Configuration

Moving on to the Interface Configuration menu item, as seen in Figure 6-10, you find a selection from the following sub-configuration links, depending on whether you have selected TACACS+ or a form of RADIUS when you entered your AAA client:

  • User Data Configuration

  • TACACS+ (Cisco IOS)

  • RADIUS (Microsoft)

  • RADIUS (Ascend)



  • Advanced Options


If you do not see RADIUS options here, you need to add an AAA client that uses the RADIUS protocol. Interface Configuration is directly affected by Network Configuration.

The User Data Configuration link enables you to customize the fields that appear in the user setup and configuration. Here you can add fields such as phone number, work location, supervisor name, or any other pertinent information.

The TACACS+ (Cisco IOS) link enables the administrator to configure TACACS+ settings as well as add new TACACS+ services. You can also configure advanced options that affect what you see in your interface. It is important you understand how this works. Depending on the current configuration of your server, if you go to the TACACS+ link, you might or might not see two columns. If you do see two columns, you are able to configure user-level settings as well as group level. Figure 6-11 displays what you see before enabling per-user TACACS+/RADIUS attributes.

In Figure 6-12, you can see the change to the TACACS+ (Cisco IOS) settings page after going through the following steps:

Step 1

Select the Interface Configuration button on the left side menu.

Step 2

Select Advanced Options.

Step 3

Select Per-user TACACS+/RADIUS Attributes.

Step 4

Select Submit.

Step 5

Select TACACS+ (Cisco IOS).

Figure 10Figure 6-10 Interface Configuration

Figure 11Figure 6-11 TACACS+ (Cisco IOS) Before User Attributes

Figure 12Figure 6-12 TACACS+ (Cisco IOS) After User Attributes

You should now have two columns available, User and Group. By selecting these options at the user level or group level, you enable these configuration options within each menu.

Here is where the user-to-group relationship comes into play. If an option is selected to appear in both the user and group configurations, and the user-level configuration is different than the group level, the user-level configuration takes precedence. Most of the features are available in both user and group configurations with a few exceptions. At the user level, you can configure passwords, expiration, and static IP addresses. At the group level, you can configure password aging as well as time-of-day restrictions for different categories.

Administration Control

The Administration Control section is where you configure all aspects of ACS for administrative access. Here you have the ability to add administrators and configure Access Policy. Information such as IP addresses that are allowed to access ACS, IP addresses that are not allowed to access ACS, and HTTP port allocation can be configured here.

Recall that ACS uses port 2002 as the listening port, but after connection to that port is made, you are redirected to a random port number. When ACS is positioned behind a firewall, this random port assignment becomes a security issue. You have the ability to specify a range of ports used so that you can configure access restrictions within your firewall to match, as seen in Figure 6-13. This is especially helpful when using a PIX Firewall.


The Secure Socket Layer Setup option was not available in version 3.0.

Figure 13Figure 6-13 HTTP Port Allocation

Session Policy enables you to alter the timeout, allow automatic local logins, and respond to invalid IP addresses. You can also choose to lock administrator access after a certain number of tries.


Audit Policy enables you to configure File Management and Directory Management options.

External User Database

In this section, you see where to configure an unknown user policy. This same topic is covered in extensive detail in Chapter 11, "System Configuration." You also configure database group mappings to external user databases as well as perform the actual database configuration. Further, you are given a list of compatible databases, and you can choose which one you will configure to be used with ACS.

The servers that are available for use as an external database are as follows:

  • Windows NT/2000

  • Novell NDS

  • Generic LDAP

  • External ODBC Database

  • LEAP Proxy RADIUS Server

  • RADIUS Token Server

  • VASCO Token Server

  • ActivCard Token Server

  • PassGo Defender Token Server

  • CRYPTOCard Token Server

  • SafeWord Token Server

  • RSA SecurID Token Server

Each version of ACS includes more and more support for external databases while greatly improving the functionality of the ACS database.

Reports and Activity

The Reports and Activity section provides a wealth of tools in not only troubleshooting, but also monitoring your network. In the time that I have been a security instructor, I make it a point to teach students that if you are going to log it, you better look at it. So many times I have been in networks running Intrusion Detection Systems, SYSLOG, and other types of monitoring, yet nobody takes the time to look through the logs.

Within ACS, you have the ability as an administrator to monitor your network security on a number of levels. The available logs that ACS keeps for you follow:

  • TACACS+ Accounting—All the Accounting reports include information such as time/date, username, type of connection, amount of time logged in, and bytes transferred. The information that is included in these reports is configurable by the administrator in the System Configuration section under Logging. This is looked at in more detail in Chapter 12. These reports can be found at Program Files\CiscoSecure ACS v3.x\Logs\TACACS+Accounting.

  • TACACS+ Administration—The TACACS+ Administration reports include all of the command requests from AAA clients such as routers or firewalls where command authorization is configured. These reports can be found on the hard disk of ACS at Program Files\CiscoSecure ACS v3.x\Logs\TACACS+Administration.

  • RADIUS Accounting—See the first bullet item in this list. These reports can be found in Program Files\CiscoSecure ACS v3.x\Logs\RADIUSAccounting.

  • VoIP Accounting—See the first bullet item in this list. These reports can be found in Program Files\CiscoSecure ACS v3.x\Logs\VoIP Accounting.

  • Passed Authentications—Passed Authentications is straightforward. The information gained within these report assists with user administration as well as in troubleshooting users that are failing authentication. These reports can be found in Program Files\CiscoSecure ACS v3.x\Logs\Passed Authentications.

  • Failed Attempts—Similar to Passed Authentications, this report assists with user administration as well as in troubleshooting users that are failing authentication. These reports can be found in Program Files\CiscoSecure ACS v3.x\Logs\Failed Attempts.

  • Logged-in Users—Again this report assists with user administration as well as in troubleshooting users that are failing authentication; however, the Logged-in Users file is rather unique. Most of the logging files in ACS create a comma-separated value (CSV) file and store them for each period, usually one day, on the hard drive of the server. The Logged-in Users file is not saved as a CSV file. As users log in, they are maintained in this file, organized by the name of the AAA client. You can purge the entries if they appear to be hung entries.

  • Disabled Accounts—This report enables you to view accounts that have been disabled.

  • ACS Backup and Restore—The ACS Backup and Restore report is available only if the option in Interface Configuration is enabled. This log maintains a history of the dates and times that ACS was backed up and/or restored. These reports can be found in Program Files\CiscoSecure ACS v3.x\Logs\Backup and Restore.

  • Remote Database Management Source (RDBMS) Synchronization—The RDBMS Synchronization is also available only when the option is configured in the Interface Configuration Advanced Options. You don't enable the report; you enable RDBMS Synchronization. This allows ACS to keep report information on RDBMS Synchronization. This logs the time and reason for RDBMS Synchronization. This is discussed in more depth in Chapter 11. These reports can be found in Program Files\CiscoSecure ACS v3.x\Logs\DbSync.

  • Database Replication—Database Replication is yet another report that must be enabled in interface configuration. This report logs the time that the ACS database was replicated to the backup server. This configuration is discussed in Chapter 11. These reports can be found in Program Files\CiscoSecure ACS v3.x\Logs\DBReplicate.

  • Administration Audit—Administration Audit logs all of the activity in ACS that is performed by administrators. This keeps track of who logged in, what users and groups they made changes to, and what time they logged out. These reports can be found in Program Files\CiscoSecure ACS v3.x\Logs\AdminAudit.

  • User Password Changes—This report tracks changes to users' passwords performed through the User Changeable Password Module. These reports can be found in Program Files\CiscoSecure ACS v3.x\CSAuth\PasswordLogs.

  • ACS Service Monitoring—The last report is the ACS Service Monitoring report. This report keeps track of all the events that ACS has had within the services it monitors. An example of a service that might be monitored is CSAdmin or CSTacacs. By default, CSMon is enabled. This is, however, configurable. To configure this, you must go to System Configuration and then ACS Service Management. Here, you can choose to monitor the login process, generate events when someone tries to log in to disabled accounts, and so on. These reports can be found in Program Files\CiscoSecure ACSv3.x\Logs\ServiceMonitoring.

The Reports and Activity interface is seen in Figure 6-14.

As far as viewing these reports goes, you can view them in the ACS interface or from the hard drive of the ACS server. The logs are stored as CSV files.

You can view the reports in spreadsheet programs like Microsoft Excel. For even more functionality, you can import these into third-party software such as Crystal Reports. These reports are discussed in more detail in Chapter 12. If you do not have access to the hard drive of the ACS server, you are given the ability to download the logs from the ACS interface.

Figure 14Figure 6-14 Reports and Activity

Online Documentation

The online documentation of ACS is there to help you out if you get stuck. If you have followed along on an ACS server up to this point, you have probably noticed that in different configuration menus you find some brief help on the right-hand side of your screen in the browser window. The online help is more detailed configuration information. You can access the PDF form if you have the CD-ROM, or it is available in the ZIP file that you downloaded from the Cisco website.

2. Starting Point for Configuring Your Server | Next Section

Cisco Press Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from Cisco Press and its family of brands. I can unsubscribe at any time.


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about Cisco Press products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information

To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.


Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites; develop new products and services; conduct educational research; and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.


If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@ciscopress.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information

Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.


This site is not directed to children under the age of 13.


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information

If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.


Users can always make an informed choice as to whether they should proceed with certain services offered by Cisco Press. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.ciscopress.com/u.aspx.

Sale of Personal Information

Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents

California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure

Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact

Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice

We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020